Sale!

Presonus R65 Ribbon Tweeter Studio Monitor (Free Isolation Pad)

$1,050.00 $985.00

*Free a pair of Adam Hall Spadeco 2 speaker (worth $55) isolation pad while stocks last.

You won’t believe it! A pair of ribbon tweeter studio monitor selling below $1,000! Presonus has done once again. With the expanded R series added into the family, Presonus R65 – A 150W Active 2-way Studio Monitor with 6.5″ Kevlar Woofer and 6.8″ AMT Ribbon Tweeter offers you a constant and transparent sound.

Out of stock

Description

Presonus R65 a custom 6.8-inch2 Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. This allows you to hear the “air” and the greater sense of space that is characteristic of audiophile recordings. The R series’ transparent and highly accurate sound makes them ideal for use in both commercial and home recording studios as well as broadcast and post-production environments.

In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R65 uses an incredibly thin, folded Kapton membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.

Features:

  • 2-way active AMT studio monitor with DSP
  • 6.8-inch2 AMT Tweeter (equivalent to a 3” diaphragm)
  • Class D biamped power configuration: 100W LF, 50W HF
  • Power-conservation mode
  • Balanced XLR and 1/4”TRS, and Unbalanced RCA inputs
  • Input-level control with 10 dB of gain above unity
  • High-frequency driver adjust (linear, +1 dB, -1.5 dB, -4 dB) above 2 kHz
  • High-pass filter switch (linear, 60 Hz, 80 Hz, 100 Hz) with -24 dB/octave slope
  • Acoustic Space switch (linear, -1.5 dB, -3 dB, -6 dB) to compensate for bass boost near a wall

 

Specifications:

Inputs
• 1- Balanced XLR
• 1- Balanced ¼” TRS
• 1- Unbalanced RCA

Performance
• Frequency Response – 45 Hz – 22 kHz
• Crossover Frequency – 2.7 kHz
• LF Amplifier Power – 100W Class D
• HF Amplifier Power – 50W Class D
• Peak SPL (@ 1 meter) – 104 dB
• LF Driver – 6.5” Kevlar®
• HF Driver Type – AMT
• Diaphragm – 6.8-inch² (4,400 mm²)
• Equiv. Diaphragm ø – 3” (75 mm)
• Input Impedance – 20 kΩ balanced, 10 kΩ unbalanced
• SNR (typical, A-weighted) – >100 dB

User Controls
• Volume Range – A-type taper
• HF Driver – Linear, +1 dB, -3 dB, -6 dB
• Highpass filter – Linear, 60 Hz, 80 Hz, 100 Hz
• Acoustic Space – Linear, -1.5 dB, -3 dB, -6 dB
• Energy Conservation Mode – On/Off/Query

Protection
• RF interference
• Output-current limiting
• Over-temperature
• Turn-on/off transient
• Subsonic filter
• External mains fuse

Power
• Factory preprogrammed – 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
• Standby Power – < 0.5W

Cabinet
• Vinyl-laminated, medium-density fibreboard

Physical
• Width – 8” (203 mm)
• Depth – 10.3” (261 mm)
• Height – 13” (328 mm)
• Weight – 6.65 kg

Reviews

There are no reviews yet.

Be the first to review “Presonus R65 Ribbon Tweeter Studio Monitor (Free Isolation Pad)”

Your email address will not be published. Required fields are marked *